Pen spring
Micro compression springs for retractable pens and click mechanisms. Design the exact wire diameter and length and quote instantly.
Tipo e materiale consigliati
Pens need fine-wire stainless 302 springs, which resist handling corrosion and hold a stable click force over thousands of cycles. The ground end seats flat in the pen body.
Specifica di riferimento
| Tipo | Compression |
|---|---|
| Materiale | Inox 302 |
| Diametro filo | 0,35 mm |
| Diametro esterno | 3 mm |
| Lunghezza | 18 mm |
| Costante elastica | 0,87 N/mm |
| Carico max sicuro | 4 N |
| Altezza a pacco | 3,5 mm |
| Indice molla | 7,6 |
Valori calcolati per l'esempio di riferimento; regola tutto nel progettista.
Punti di attenzione
- Fine wire (0.3–0.5 mm) with tight force tolerance.
- Stainless 302 avoids corrosion from hand contact.
- High production cadence with very low unit cost.
Progetta la tua molla per questa applicazione
Apri l'esempio nel progettista, regola le dimensioni e ottieni un preventivo istantaneo.
Progetta e quotaDomande frequenti
What is the typical wire diameter?
Between 0.3 and 0.5 mm depending on the desired click force.
Which material is recommended?
Stainless 302, for corrosion resistance and stable force over cycles.